Custom Fit Suppressor Covers

All Suppressor Wraps are made to order, in the USA, please allow a 3 week lead time. Lead time can change due to demand.

Two styles available:

BMOD and PRO SERIES

BMOD
Basic Mirage Obstruction Device (BMOD) for mirage mitigation while shooting with suppressors.
The wrap keeps you from burning yourself as well as reduces mirage off the suppressor as it heats up.
Your suppressor heats up an average of 17 degrees each shot which can add up in a hurry.
The hotter your suppressor gets, the more mirage that you will see.
Mirage will distort your sight picture and make it hard to zero and shoot targets at long distance.
The BMOD helps obstruct the mirage and allows you to take your suppressor off after shooting and even store it.
This cover is rated to 400 degrees. The shock cord system keeps the suppressor tight to the suppressor keeping it from flying off the front after you shoot it (I have seen it happen).
The shock cord is easy to replace if it ever wears out.
The wrap is designed to be used with suppressors that are on precision weapons and with strings of fire consisting of 20-30 rounds over 10 minutes or more.
PRODUCT INFO
Inner Material: Carbon based textile
Outer Shell: Cordura
Strap: Nylon
Shock Cord: 1/8″
Thread: Nylon/Kevlar
The suppressor wrap should always be kept folded together when not on the suppressor to prevent the shielding material from being ripped or frayed.
While the material can withstand intense heat…it cannot withstand rough handling.
It is best to keep it safely against your suppressor.
The suppressor wrap is designed to stay on and stay tight, however, it is the buyers responsibility to ensure that the suppressor wrap is not sliding off.
Suppressor wraps that are shot will not be replaced.
The suppressor wrap is not designed for heavy rates of fire and therefore will not be replaced if it is melted.

PRO SERIES
The Pro Series is a specially designed cover meant to address the needs of the PRS/NRL shooter with its ability to mitigate mirage and stay in place during rapid fire stages with high round counts.
Your suppressor heats up an average of 17 degrees each shot.
The hotter your suppressor gets, the more mirage that you will see. Mirage will distort your sight picture and make it hard to zero and shoot targets at long distance.
A shift in a suppressor cover not only has the potential to send it down range, but a shift in POI (point of impact) is also possible.
The Pro Series helps obstruct the mirage and keeps your cover on your suppressor where it belongs.
The inner material will withstand 1,000 degrees so there is no need to worry about burning it up.

The webbing and “G” hook system keeps the outer cover tight to the inner core, while the Kevlar slip cord keeps the cover in place.
The Kevlar cord can withstand temperatures of over 800 degrees…but let’s be honest, if your barrel is that hot on your precision rifle, it is toast.

The wrap is designed to be used with suppressors that are on precision weapons and with strings of fire consisting of 60 rounds in approximately 10 minutes and limited rapid fire.
This cover is not full auto rated!

The inner core comes in two sizes:
Small: Good for suppressors 1.25″-1.5″ in diameter
Standard: Good for suppressors 1.55″-1.75″ in diameter

Product Info
Inner Material: High Temp Fiberglass Sleeve
Outer Shell: 1000D Cordura or Heavy Canvas
Strap: Nylon
Thread: Polyester
The suppressor wrap is not designed for full auto fire and therefore will not be replaced if it is melted.

Available Sizes
The Pro Series cover can be cut to any length, however the diameter is limited to suppressors between 1.3″-1.75″.

Pricing includes delivery to the USA:
$50 for one BMOD
$80 for one PRO Series

Payment options include Cash or Zelle, Venmo, or Cashapp, Credit Card is possible for a 3% additional fee.

Email Kevin at kkinzer@gsltechnology.com with the GSL Model you would like a cover for to get one ordered.